Ensure complete home safety with the MOES Carbon Monoxide & Natural Gas Detector, featuring dual-sensor protection against both carbon monoxide (CO) and combustible gases such as LPG and natural gas. Ideal for kitchens, basements, and other high-risk areas, this compact device provides reliable 24/7 monitoring without the need for multiple detectors.
Its smart 4-stage alarm system instantly alerts you when CO or gas levels rise, with visual indicators and an 85dB dynamic alarm that becomes louder and faster as danger increases, giving you enough time to take action before it is too late.
With Plug & Play installation, you can protect your space within seconds without wiring or complicated setup. Simply plug it into any standard outlet and it is ready to use.
More than just a gas detector, it also features built-in temperature and humidity monitoring, helping you maintain a safer and more comfortable indoor environment.
4-Stage Gas & CO Alert System:
Provides precise risk awareness with four real-time alert levels:
- Green – Safe: CO < 50ppm, Gas < 5% LEL
- Yellow – Caution: CO 51–100ppm, Gas 5–8% LEL
- Orange – Warning: CO 101–150ppm, Gas 8–15% LEL
- Red – Danger: CO 150–999ppm, Gas >15% LEL
-
Dynamic Alarm System:
Equipped with an 85dB alarm that becomes louder and faster as CO or gas levels increase, combined with bright LED indicators for rapid alerts. -
Plug & Play Installation:
No wiring or complex setup required. Simply plug it into a standard outlet for immediate protection, making it ideal for kitchens, boiler rooms, and other high-risk areas. -
Built-in Temperature & Humidity Monitoring:
Continuously monitors indoor temperature (14°F–122°F) and humidity (0–95% RH) to help maintain a healthier living environment. -
24/7 Dual Sensor Protection:
Combines carbon monoxide and combustible gas (LPG/Natural Gas) detection in one device, providing reliable full-time monitoring while reducing false alarms and eliminating the need for separate detectors.
Note: This product is non-smart and cannot be controlled by a mobile phone.
- Model: PTH-24E
- Carbon Monoxide Detection Range: 0–999PPM (±10%)
- CO Alarm Range: Initial default 51 PPM
- Combustible Gas Detection: GAS Level 1–4 (15% LEL)
- Gas Alarm Range: GAS Level 2 ≥ 5% LEL
- Operating Temperature: -10°C to 50°C (±1.5°C) / 14°F–122°F
- Humidity Range: 0–95% RH (±5%)
- Input Voltage: 100–220V / 50–60Hz
- Plug Type: Replaceable Plug
- Screen: 2.3-inch IPS Display, 240 × 240 Resolution
- Shell Material: Flame Retardant ABS Plastic
- Working Temperature: -10°C–50°C / 14°F–122°F
- Alarm: Yes
- Product Size: 105 × 55 × 52 mm (With Plug)
Carbon Monoxide & Natural Gas Detectors Test
Carbon Monoxide:
1. Power On: Connect to power and wait 1 min for stabilisation. Ensure readings are steady
2. Test Detection: Use a cigarette to produce CO in a ventilated area. Hold it 2 inches from the sensor and check if readings rise
3. Reset & Safety:
Remove the source and ensure readings return to normal
Natural Gas :
1、Power On – Connect and wait 60 sec.
2、Sensitivity Test – Release gas for 10 sec (unlit lighter) 2” from intake; alarm sounds & red light flashes.
3、Reset Check – Alarm stops & readings return to baseline within 60 sec after gas is removed.
Product Details
Clear digital display with intuitive buttons for temperature unit switching, screen rotation, and brightness adjustment. Compact plug design for easy wall outlet installation, plus vents and indicators for reliable CO detection and alerts.
